Siamdoo

Win or Loose

Asphalt Driveway: Installation and Maintenance

Asphalt is not a new thing. It is everywhere, from driveways to highways and parking lots, but when it comes to asphalt driveway installation, there are several things that municipality employees, commercial property owners, and homeowners might not be aware of. Asphalt Sydney contractors now use might be the material you require for cost-effective, flexible, and hurriedly completed driveway.

Steps to follow when installing asphalt driveways:

Water runoff evaluation

Before the installation process begins, your asphalt contractor should examine the installation site. This will enable him or her to determine the slope and pitch for proper water runoff. Most importantly, the expert will be able to make the right decision when it comes to choosing a reliable asphalt Sydney has to offer. It is important to note that water is an enemy of asphalt pavement and must be well thought-out before the process begins.

Foundation installation

Once the grade is determined, sub-base or the foundation can be laid. The foundation is an essential part of driveway installation because of two main reasons:

• It forms a frost barrier that reduces winter damage because of thawing and freezing

• It offers a stable surface on which the pavement will be supported

When the sub-base is being installed, there are certain issues that should be addressed, including base thickness, drainage, compactions, dimensions, and base stability. The least thickness of the sub-base for many driveway installations is around 4 inches. For this case, the thickness is usually based on what the facility will be used for. For instance, a residential driveway for car traffic needs sub-base with a thickness of about 4-6 inches. For heavy equipment, trucks or trailers, a thicker base is required. Check out at Creggs Asphalt

Proper installation practices

Perhaps, an essential aspect of this kind of a project is a reputable asphalt contractor and reliable installation team. Hiring an expert who is conversant with materials such as Sydney asphalt means that your project will be worked on perfectly to meet your drainage, surface, and climate needs.

A contractor that uses an ideal asphalt Sydney has to offer and follows the required installations guidelines, such as installation timelines and temperature, and good surface preparation will make sure the surface of your driveway will be looking attractive for several years to come. Buying and installing asphalt in Sydney can be less expensive compared to materials like concrete.

Asphalt driveway maintenance:

Regular seal-coating

To uphold the durability and strength of your driveway surface, it is essential to act in accordance with the recommendations of your contractor. This may include seal-coating your facility 1 to 2 years after installation process and then every 5 to 10 years afterward. The seal-coat application can protect the driveway surface from harmful effects of UV radiation, car pollutants, and reducing water penetration.

Filling cracks and potholes

It is important to fill any crack that appears on the surface. Cracks allow water to reach the sub-base. This can compromise the strength and the integrity of your driveway. In most cases, potholes occur due to contraction and expansion of water below the pavement. They must be repaired using best asphalt Sydney has to offer and within the shortest time possible to prevent larger and more costly repairs. For more information, visit their website at: http://creggsasphalt.com.au/

 

There are no comments

Leave a Reply

Your email address will not be published. Required fields are marked *